A4 Snap Frame 20mm Silver Aluminium Poster Frame Anti Glare Cover

The Notice Frame for Doors, Glass and Walls You Can't Drill Into

A4 · 20mm silver anodised profile · 250 x 340mm overall · anti-glare PVC cover · heavy-duty 3M double-sided adhesive mount · no drilling required

Most sites don't need one big poster. They need twenty small notices, on fire doors, in lift lobbies, above the sink in the staff room, beside the till, or on the glass at the entrance. Half those surfaces can't take a screw, either because the lease says so or because there's nothing behind them to screw into.

This A4 snap frame is supplied with 3M heavy-duty double-sided adhesive, allowing it to mount directly to suitable doors, glass panels, tiles and smooth partitions without drilling or mechanical fixings. This makes it particularly practical for fire safety notices, evacuation information, compliance signage and workplace instructions where drilling into the mounting surface may not be suitable.

The supplied 3M adhesive is supported by an SGS test report for 3M model 9448AB double-sided adhesive material. The tested sample achieved a PASS result for Persistent, Bioaccumulative and Toxic (PBT) chemicals under US EPA TSCA Section 6(h).

Once it's up it stays in place. The border snaps open on all four sides, so changing the notice is a ten-second job done in place with no tools. The profile is 20mm, narrower than the 25mm commonly used on A4 frames, helping keep the border from crowding the displayed information.

Silver anodised aluminium with mitred corners provides a clean, professional finish, while the transparent PVC cover is designed to be scratch resistant, dust proof, moisture proof and anti-glare, helping notices remain clear and easy to read under indoor lighting.

Product Features

• Heavy-duty 3M adhesive mounting: supplied with 3M double-sided adhesive for secure installation on suitable smooth surfaces without drilling or screws.
• SGS-tested 3M adhesive material: supporting SGS documentation for 3M 9448AB reports a PASS result for PBT chemical testing under US EPA TSCA Section 6(h).
• Ideal for fire safety signage: suitable for displaying fire door notices, evacuation information, emergency instructions and other workplace compliance signage.
• 20mm slim profile: keeps the border compact while maximising the visible A4 display area.
• Snap open on all four sides: change notices quickly while leaving the frame mounted in position.
• 250 x 340mm overall: compact sizing suited to doors, corridors, lift lobbies and areas beside workplace fittings.
• Silver anodised aluminium: professional finish with mitred corners for commercial environments.
• Anti-glare PVC cover: helps protect printed notices from dust, moisture and everyday contact while improving visibility under indoor lighting.
• Suitable for multi-site installations: practical for standardised signage programmes across offices, retail sites, warehouses and facilities.

Perfect For

• Fire doors and fire safety notices: display evacuation, fire door and emergency information without drilling into suitable door surfaces.
• Workplace compliance signage: procedure notices, safety instructions and mandatory workplace information.
• Glass entrances and partitions: adhesive mounting where conventional screw fixing is impractical.
• Retail and hospitality: operating notices, menus, instructions and customer information.
• Staff rooms and back-of-house areas: rosters, procedures and regularly updated workplace notices.
• Medical and allied health environments: patient and staff information behind a wipeable protective cover.
• Multi-site rollouts: standardise signage presentation across multiple locations.

Mounting Notes

The frame is supplied with 3M heavy-duty double-sided adhesive and is intended for one-time application to a clean, dry, smooth and suitable mounting surface.

For best adhesion, ensure the installation surface is free from dust, grease and moisture before mounting.

The supplied adhesive material is supported by an SGS test report covering PBT chemicals under US EPA TSCA Section 6(h). This SGS report relates to the chemical testing of the adhesive material and should not be interpreted as a fire-rating or adhesive-strength certification.

This frame is designed for indoor use.

Order A4 Snap Frames with 3M Adhesive Across Australia

With its 20mm silver anodised aluminium profile, 250 x 340mm overall size, anti-glare PVC cover and heavy-duty 3M adhesive mounting, this A4 snap frame provides a practical solution for fire safety notices, workplace compliance signage, offices, retail stores, hospitality venues, schools and healthcare facilities across Australia.